PP Markavloppssystem

PP Land drainage system

The sewer pipe system made of PP is produced in the diameter range DN/OD 110 - 800 mm and in the stiffness classes SN 2, SN 4, SN 8, SN 12, SN 16. Pipes for external drains are orange-brown (RAL) 8023), uniform in terms of shades and intensities with a smooth outer and inner surface. All types of sewer pipes and fittings are interconnected between each other and with smooth-walled pipes through sleeves with a groove in which an elastomeric seal is placed.


Polypropylene (PP) is a material with high resistance to chemical compounds. Piping systems made of PP in accordance with this standard are resistant to a wide range of pH 2 (acid) to pH 12 (alkali), corrosion caused by water such as municipal sewage, rainwater, surface water and groundwater. Information on the chemical resistance of PP materials can be found in ISO/TR 10358: 1993, for rubber materials in ISO/TR 7620: 2005. The PP sewerage system with gaskets is resistant to maximum permanent sewerage temperature above +90 C. Pipes and fittings are resistant to abrasion. In special cases the abrasion resistance can be tested according to the method specified in EN 295-3.


  • Underground unpressurised drainage and sewerage in the ground in a road lane (under road or off-road) or other areas used for communication technology.
  • Under harsh conditions, e.g. low temperatures, high groundwater level; exposed to tough operating conditions, e.g. high temperatures and chemical aggressiveness of wastewater, very shallow or deep foundations, high dynamic loads of the casing, increased abrasion resistance.
  • In gravity drainage, rainwater and industrial drainage.

Standards

  • EN 1852-1 - Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specification for pipes, fittings and systems
  • EN 13476-2 - Plastics piping systems for non-pressure underground drainage and sewerage - Piping systems with structural walls made of expanded poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Pipes and fittings with smooth internal and external surface and systems, type A

}

Filtrera & sortera

Filter

6 products

Image
Sewage Pipe Kaczmarek KG PP with Double Socket and Seal SN12 S12,5 Finns varianter Sale price
Image
Sewage Pipe Kaczmarek KG PP with Double Socket and Seal SN16 S10,5 Finns varianter Sale price
Image
Sewage Pipe Kaczmarek KG PP with Double Socket and Seal SN10 S12,5 Finns varianter Sale price
Image
Sewage Pipe Kaczmarek KG PP with Socket and Seal SN10 S12,5 Finns varianter Sale price
Image
Sewage Pipe Kaczmarek KG PP with Double Socket and Seal SN8 S14 Finns varianter Sale price
ImageImage
Sewage Pipe Kaczmarek KG PP with Socket and Seal SN8 S14 Finns varianter Sale price