Manifold with Mixing Unit KAN-therm InoxFlow USVP Series
3 circuts
Article number 1316160045
Description
Use adapters for M30×1.5 servomotors on the upper beam. Use the manifold with an integrated mixing unit in the installations of the maximum heat load up to 15 kW*. *Assuming the following parameters: loop diameter 16×2 mm, loop length up to 100 m, pipe spacing 15 cm, supply/return temperature 40/30°C. Do not use with low-parameter heat sources.
Read MoreAddons
Heat pipe
Accessories
-
Valve Set KAN-therm Straight SET-P G1"xG1"409.81 SEK -
Valve Set KAN-therm Angle SET-K G1"xG1"561.21 SEK -
Tee with Air Vent and Drain Valve KAN-therm G1"316.22 SEK
Documents
| Installation guide | Open |
|---|
Use adapters for M30×1.5 servomotors on the upper beam. Use the manifold with an integrated mixing unit in the installations of the maximum heat load up to 15 kW*. *Assuming the following parameters: loop diameter 16×2 mm, loop length up to 100 m, pipe spacing 15 cm, supply/return temperature 40/30°C. Do not use with low-parameter heat sources.
Description
Use adapters for M30×1.5 servomotors on the upper beam. Use the manifold with an integrated mixing unit in the installations of the maximum heat load up to 15 kW*. *Assuming the following parameters: loop diameter 16×2 mm, loop length up to 100 m, pipe spacing 15 cm, supply/return temperature 40/30°C. Do not use with low-parameter heat sources.
Read MoreAddons
Heat pipe
Accessories
-
Valve Set KAN-therm Straight SET-P G1"xG1"
409.81 SEK -
Valve Set KAN-therm Angle SET-K G1"xG1"
561.21 SEK -
Tee with Air Vent and Drain Valve KAN-therm G1"
316.22 SEK
