Pipes for Water Supply System Kaczmarek PE100-RC Tytan Type 2/3 SDR11 PN16 Three Layers
500 x 45.4 mm, 12 m
Article number 3763368540
Dimensions
500 x 45.4 mm
Length
High-density polyethylene, abbreviated as PE-HD, is used to manufacture segmental pipes and fittings. It is a raw material that works well in many pipe applications. It is characterised by high resistance to impact loads that can occur at the pipe-laying stage and a wide range of operating temperatures that allow work to be carried out at any time of the year.
The subject of the presentation is PE 100 single-layer pipes and TYTAN PE/PE and TYTAN PE/PP single- and double-layer pipes made of polyethylene PE 100-RC and polypropylene (PP) intended for pressure (waterworks, gas), fuel, pressure and vacuum sewerage) and gravity (sanitary sewerage, drainage) applications, as well as making culverts under road embankments laid underground in the road lane.
The TYTAN system consists of:
TYTAN pipe tests carried out at HESSEL Ingenieurtechnik GmbH and at the Oil and Gas Institute in Krakow confirm their resistance to the effects of scratches and point loads that can occur as a result of building the network on site without applying ballast and backfill and for building and renovating the network using traditional methods and excavation.
Pipe sections depending on diameter and purpose can be combined using the following methods:
They are intended, among other things, for the construction of water supply networks, sewerage networks and for the transport of aggressive liquids.
Dimensions
500 x 45.4 mm
Length
